Glues Direct Phone:
01428 751358

If Glues are your question... GluesDirect have your answers

 Specilaists in adhesive innovation, manufacture and development

Telephone sales and technical advice welcome
Worldwide Shipping
& Credit Accounts Available

PPE & SANITISERS AVAILABLE FOR IMMEDIATE DESPATCH
CLICK HERE

01428 751358

sales@gluesdirect.co.uk

         

  Top » Catalog » Wood Glues » Resorcinol (PRF) Resins » My Account  |  Cart Contents  |  Checkout   
Categories
PPE EQUIPMENT
Alcohol Sanitiser Hand Gel
Disinfectant Sprays
Aerosol/Canister Spray Adhesive
Alpha Adhesives
Applicators
Beardow Adams Adhesives
Bison Wood Glues
Bostik / EVO-STIK Adhesives
Bulk Hot Melt Applicators
Casco Adhesives
Chemicals
CRESTABOND
Gifts
Contact Adhesives
Craft Glues
D.I.Y
Education
Engineering Adhesives
Epoxy 2-Part Adhesives
GlueDots™
Glue Film
Hot Melt Glue Guns
Hot Melt Glue Sticks
Hot Melt Glues & Adhesives
Hand Cleaner
HOWARINE CALVERT
IDEM PAPER & ADHESIVES
Kleiberit Adhesives
Latex Adhesive
Metal Primers
MS Polymers
Other Adhesives
Panel Adhesives
PARABOND
Polyurethane Adhesive
Pressure Sensitive Adhesive
Pressure Rollers
PVA Adhesive's
Sealant / Adhesives
Spray Adhesives
SPECIAL OFFERS
Solvents / Cleaners / Thinners
Soudal
Stix 2 Anything
Super Glues
Structural Adhesives
Tapes
Titebond Adhesives
TensorGrip Spray Adhesives
Tuskbond Spray Adhesives
Trade Adhesives
UF Resins - Urea Formaldehyde
Winter Supplies
Wood Glues
  Polyurethane Adhesives
  PVA Adhesives
  Resorcinol (PRF) Resins
  UF Resins
Special Shipping
Newest Products
Goto...
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1711 & 2520 Resorcinol (PRF) Resin System BS EN 301 Adhesive Price From£14.58

AKZO NOBEL
CASCO ADHESIVES

Phenol-Resorcinol Formaldehyde Resin

 

There are various systems within the Casco range to meet varying application method and end user requirements. A typical system is as follows:

Cascosinol Phenol Rescorcinol Adhesive 1711 with Hardener 2520

 

The combination Cascosinol 1711 with hardener 2520 is approved by NTI, Norway, Otto-Graf insitut (FMPA), Germany, SKO/KOMO (DHBC N0. 32389), Holland for the Production of load-bearing timber structures.
The combination can also be used in door production, lamination, finger jointing and other applications in the wood working industry, where there is demand for high water and weather resistance for the joints. The combination has short pressing times even at lower pressing times.
 
Technical Data

Type
1711     Phenol Resorcinol glue

Delivery form
1711     liquid
2520     liquid

Colour
1711     dark brown
2520     greyish brown

Viscosity
Brookfield LVT, sp. 4, 12 r/min, 25°C
1711     approx. 5000 mPa.s
2520     approx. 8000 mPa.s

Density
1711     approx. 1150 kg/
2520     approx. 1220
kg/

Dry solids
1711     approx. 56%

pH
1711     approx. 8
2520     approx. 5

Flash Point
1711     70°C
2520     85°C

 
Other Data

Properties of the bond-line
Cascosinol 1711 with hardener 2520 fulfils the requirements according to EN 301 (for glue type I and II, service classes 1, 2, 3), EN 391, EN 392 and DIN 68141.

Storage life
1711     6 months at 20°C in well closed packaging
2520    
6 months at 20°C in well closed packaging

If the packaging is left open when not in use the glue is susceptible to skin formation on the surface. To avoid this the packaging should be closed when not in use

 
Directions for use

Application tools
Roller spreader, ribbon spreader etc

Mixing ratio
1711     100 parts by weight
2520     15 parts by weight
 
The accuracy in the hardener amount shall be ± pbw.

Pot life
Temperature of glue mix            10°C 15°C 20°C 25°C 30°C
Pot life in hours                         4½   2¼   1¼    2/3    ½
 
When preparing large amounts of glue mixture, it is recommended to cool the glue to 10-15°C and after that add the hardener to extend the pot life.

Wood temperature
The temperature should not be lower than 20°C.

Moisture content of the wood
8 - 14 %. For the production of laminated beams 10 - 12%
Planing of the wood
Newly planed surfaces give the best gluing result. For best result at laminated mean production the timber must be smoothly planed. For optimum bonding strength the planing should take place within 24 hours before gluing.

Glue spread
For production of laminated beams a minimum glue spread of 400-450 g/m² single-sided is recommended. A reduction of the glue spread, e.g. at very short assembly times, is only allowed to be done together with the Casco Products Technical Advisors, depending on the production parameters for the production line in question. This optimization implies that the set parameters are followed and that a continuous control of the adhesion quality is made by means of delamination tests. At HF gluing a glue spread of 250-350 g/m² single-sided is recommended. At other applications: 150-300 g/m².
 
Difficult-to-glue wood or hardwood may require double spreading in amounts of 150-200 g/m² on each side.

Pressing temperature
Soft wood can be glued at a joint temperature of 20°C. To be sure to obtain a good result heating of the glue joint to 30°C is recommended. When gluing hard wood the temperature of the glue joint must be at least 40°C. Constructions with tensions and hard woods require at least 60°C to obtain adequate strength. Lowest pressing temperature has to be tried out. After the pressure is applied the heating can start.

Pressure
Minimum 0,5 MPa for soft wood
Minimum 1,0 MPa for hard wood
 
In laminated beam production:
Minimum 0,7 MPa for 33mm lamellas
Minimum 0,9 MPa for 45mm lamellas

According to DIN 1052/1-A1 the maximum allowed thickness of lamellae is 42mm.

Pressing time
The pressing time depends on the temperature, the distance to the innermost glue joint, the glue spread, etc. The table below may be used as a guideline.
 
 
Glue joint temperature
Minimum time for curing at indicated glue joint temperature
 
20°C
30°C
40°C
60°C
80°C
100°C
4 hours
2 hours
45 min
12 min
3 min
1 min

Prices for each variant are shown below.
 
 *Please enter the quantity for each item you wish to order and click the 'Add To Cart' button below.
 Model   Description   Name+   Quantity   Price
(incl. VAT)
 
 1.2kg Kit   Resorcinol Resin Kit   C1711-1kg/C2520-200g   £27.60 
 30kg Kit   Resorcinol Resin Kit   C1711-25kg/C2520-5kg   £360.00 
 6kg Kit   Resorcinol Resin Kit   C1711-5kg/C2520-1kg   £81.60 
Displaying 1 to 3 (of 3 products) Result Pages:  1 
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to 1711 & 2520 Resorcinol (PRF) Resin System BS EN 301 Adhesive
Information
Gluestick Selector
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
What's New? more

Alcohol Hand Sanitiser Gel - 5 Litre (Pack of 1)
£84.00

Copyright © 2020 Glues Direct
Powered by osCommerce