APOLLO A8410 SPRAYABLE CONTACT ADHESIVE
SYNTHEIC RUBBER CONTACT ADHESIVE
APOLLO CONTACT ADHESIVE

DESCRIPTION

Apollo A8410 is a high solids, non-flammable, low pressure, sprayable synthetic rubber based adhesive designed primarily for applications in the foam conversion, upholstery and furniture industry.

Apollo A8410 exhibits fast drying characteristics, aggressive tack, a long bond range, high bond strength and provides an economical and efficient means of bonding non-structural components.

As well as being suitable for bonding flexible foams to each other, Apollo A8410 is also recommended for bonding foam to metal, chipboard, hardboard and GRP etc and for the attachment of furnishing fabrics such as hessian, felt, polyester and other upholstery padding materials. It has also been used for bonding a wide range of insulation materials to metal ducting etc.

• Base: Synthetic Rubber
• Solids: 36 - 40%
• Viscosity: 500 - 700 cps @ 20°C
• Colour: Amber or tinted
• Tack Life: 1 - 20 mins
• Coverage: 15 - 25m² per litre
• Cleaner: Solvent 9
• Shelf Life: 12 months @ 5°C - 20°C

APPLICATION

Materials to be bonded should be dry, clean and free from dust, loose materials, oil and grease. Cut foam should be free from silicone lubricants.

Apollo A8410 may be sprayed through most equipment although it has been designed specifically for low pressure applications. Excellent results may be obtained using a material pressure of 20 - 30 psi and atomising pressure of 40 - 60 psi is adequate.

Apply Apollo A8410 to both surfaces to be bonded and bond immediately or for up to 20 minutes afterwards. Under conditions of high humidity, condensation of moisture on the surface may occur causing a pale 'bloom'. Under the conditions an unsatisfactory bond is likely.