Product Description
Lockfast P42 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic, medium strength thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
Lockfast P42 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
Brown liquid |
Chemical Form |
Methacrylate ester |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
Thixotropic, medium |
Strength |
Medium |
Application |
Thread sealing |
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.06 |
Viscosity @ 25°C |
1200-2750 mPas |
Flash Point |
See MSDS |
Seal to operating pressure |
4 hours |
General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|