30 Minute D4 PU Adhesive
D4 Polyurethane Wood Glue

ReactaCure 3395 is a single part, solvent free moisture curing polyurethane adhesive.

Typical Uses

ReactaCure 3395 is specially formulated to have a relatively high viscosity to reduce penetration into very porous substrates. Suitable for laminating and structural bonds to a wide variety of materials, including timber based products, hard and soft woods, galvanized steel, GRP, various plastics, glass, cork, polyurethane foams, polystyrene and mineral wool. ReactaCure 3395 can be applied by roller or in bead form. By misting the glue line with clean water the speed of set will be increased.

As this product foams during curing it is important that all components are held in place to prevent movement during the curing process.

This product contains isocyanate.

Benefits

• Solvent Free
• Easy to Use
• 30 minute working time
• 60 minute press time
• 90 minute total cure time
• High Bond Strengths
• High Temperature

Application Hints

• Ensure that surfaces are clean and free of all contaminations
• Some untreated metal surfaces such as aluminum or galvanized steel may need priming
• 3-12 m2 per litre depending on porousity of the substrates being bonded
• Sufficient even pressure should be applied to the bonded area during the curing stage to ensure good adhesion. A period of 4hours and 24 hours will be required depending on the temperature and nature of the materials to be bonded
• Allow the bond to fully cure