Contact Adhesives must be applied to both surfaces and allowed some time to dry, or if solvent based the solvent to evaporate before the two surfaces are pushed together. This time will depend on the specific adhesive, the amount applied and the ambient conditions of the time of the application. Once the surfaces are pushed together and compression applied, the bond forms very quickly but the total cure of the glue line can take several hours.
Guidelines for using Contact Adhesives
Ensure that all surfaces that are to bonded are dry, clean and free of any contaminates.
Abrade surfaces if possible.
Apply an even amount of adhesive to both surfaces in accordance with the technical information supplied.
Allow to 'dry' before bringing the surfaces together.
Apply firm even pressure and expel and air pockets.
Leave to cure before subjecting the item to any other process.
Replace the lid and seal the container immediately after use.
If you are using a solvent based product, use in a well ventilated area away from any naked flame or possible electrical arcing.
Always follow information given on the technical data sheet and heed any warnings.
1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'pd.products_info' at line 1
select count(p.products_id) as total from products_description pd, products p left join manufacturers m on p.manufacturers_id = m.manufacturers_id left join specials_retail_prices s on p.products_id = s.products_id, products_to_categories p2c where p.products_status = '1' and p.products_listing_status = '1' and p.products_id = p2c.products_id and pd.products_id = p2c.products_id and pd.language_id = '1' and p2c.categories_id = '125'pd.products_info