GluesDirect.co.uk Phone:
01428 751358

If Glues are your question... GluesDirect have your answers

Manufacturers and Distributors of Specialist Adhesives

Ask the experts on 01428 751358

Telephone sales and technical advice welcome
Worldwide Shipping
& Credit Accounts Available

01428 751358

sales@gluesdirect.co.uk
 

GluesDirect.co.uk Instagram PageGluesDirect.co.uk Facebook PageGluesDirect.co.uk LinkedIn PageGluesDirect.co.uk Twitter Page

  Top » Catalog » Contact Adhesives » My Account  |  Cart Contents  |  Checkout   
Categories
... Our Products
..Brands
Applicators
Contact Adhesives
Engineering Adhesives
Hot Melt Glues & Adhesives
Hot Melt Glue Guns
Hot Melt Glue Sticks
MS Polymers
Polyurethane Adhesive
Proflex Hot Melt Glue Sticks
PVA Adhesive's
Tapes
Wood Glues
Special Shipping
Newest Products
Goto...
Manufacturers
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
EVO-STIK SAFE 80 WATER BASED CONTACT ADHESIVE Price From£6.00

EVO-STIK SAFE 80 WATER BASED CONTACT ADHESIVE
BOSTIK SAFE 80
WATER BASED CONTACT ADHESIVE
NON SOLVENTED CONTACT ADHESIVES

EVO-STIK SAFE 80 is a non-flammable polychloroprene rubber latex based adhesive, which changes from white to clear when dry. It is economical in use and gives excellent bond strength and good heat resistance.

RECOMMENDED USE

EVO-STIK SAFE 80 can be used for bonding types of materials such as textiles, rubbers and plastic laminates to wood, plywood chipboard etc. It may also be used for bonding smooth porous surfaces of concrete or plaster as well as canvas and expanded polystyrene. Non-porous materials such as metals and painted surfaces may be bonded provided that the adhesive films are allowed to dry completely before the bond is made.

BONDING INSTRUCTIONS

SURFACE PREPARATION

  • Substrates to be bonded should be perfectly clean dry and free from dust and grease.
  • Smooth or polished surfaces should first be roughened with fine abrasive.
  • If degreasing is necessary, a detergent/water treatment should first be considered. If this is inappropriate a suitable solvent e.g. cleaner 5 may be used. It is advisable to check the effects of degreasing solvents on plastics, rubber materials and painted surfaces before carrying out the operation. All traces of cleaning solvents must be allowed to evaporate completely before application of the adhesive.

APPLICATION

EVO-STIK SAFE 80 is suitable for application by brush, paint pad, paint roller or sponge techniques.

The use of a notched or serrated spreader is not recommended.

Thoroughly stir the contents of the container before use.

Both surfaces to be bonded should be coated with an even coat of adhesive and allowed to dry. Porous surfaces such as plaster may require a second coat. The milky white opaque adhesive becomes clear when dry. The adhesive dries by evaporation of water into the atmosphere and on porous substrates also by absorption of the water into the pores. The drying time is very dependent on substrate, coating weight, temperature and humidity. Under normal conditions the film dries in 15 - 30 minutes. The process can be accelerated by warming e.g. by radiant heat or by passage of a current of warm air over the surface.

Paint Pad Application - Application by paint pad enables a very even film of adhesive to be applied, ensuring there are no high spots to delay drying. Trials have shown that an area measuring 2m x 600mm can be covered with an even film in approx. 20 seconds; this is even faster than spray application. An even film applied by paint pad dries quickly, in about 10 - 15 minutes depending upon ambient temperature and humidity.

BONDING

  • Being the two dry, coated surfaces into contact within 60 minutes of drying and press together over the entire bond area.
  • Apply as much pressure as possible by hand roller, static press or nip roller without causing damage. Sustained pressure in not necessary.

TYPICAL CHARACTERISTICS

Physical Form: Mobile aqueous emulsion
Colour: White (colourless when dry)
Chemical Type: Polychloroprene latex / resin blend
Solvent: Water
Viscosity (Brookfield RVT, 50rpm @ 20°C) Thixotropic, approx. 9500mPas
Solids Content: Approx. 53%
Specific Gravity: Approx. 1.2
Flammability: Non flammable

STORAGE

Store in a dry place in original packaging between 5 and 30°C.
Protect from frost

SHELF LIFE

12 months in its original container stored under the above conditions.

Prices for each variant are shown below.
 
 *Please enter the quantity for each item you wish to order and click the 'Add To Cart' button below.

Deprecated: Function ereg() is deprecated in /home/gluesdirect/public_html/catalog/includes/modules/master_products.php on line 75
 Model   Description   Name-   Quantity   Price
(incl. VAT)
 
 3418-5L   HydraCure 3418 - 5 Litre    HydraCure 3418 - 5 Litre   £82.10 
 SFE80-5KG   SAFE 80 - 5kg Bucket   EVO-STIK SAFE 80   £82.10 
 SFE80-30ML   SAFE 80 - 30ml Bottle    EVO-STIK SAFE 80   £6.00 
 SFE80-250ML   SAFE 80 - 250ml Bottle    EVO-STIK SAFE 80   £10.80 
 SFE80-500ML   SAFE 80 - 500ml Bottle    EVO-STIK SAFE 80   £15.00 
 SFE80-1L   SAFE 80 - 1 Litre Bottle    EVO-STIK SAFE 80   £24.00 
Displaying 1 to 6 (of 6 products) Result Pages:  1 
Shopping Cart more
0 items
Notifications more
NotificationsNotify me of updates to EVO-STIK SAFE 80 WATER BASED CONTACT ADHESIVE
Information
Gluestick Selector
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
What's New? more

HydraCure D3 PVA - 500ml
£2.64

Copyright © 2024 GluesDirect.co.uk
Powered by osCommerce