Typical Applications
PC 08 is formulated for general purpose bonding of most plastics, rubbers and other common substrates. Recommended for use on close-fitting parts and smooth, even surfaces. Can be used as a post-assembly adhesive on pre-assembled parts.
Product Description
PC 08 is a very low viscosity, low-odour alkoxy-ethyl cyanoacrylate adhesive.
PC 08 is a low bloom product specially formulated for cosmetically critical applications to eliminate whitening/chlorosis of bonded joints. The low-odour characteristic improves user comfort.
Properties of uncured material
Chemical type |
|
Alkoxy-Ethyl |
Appearance |
|
Clear |
Specific Gravity |
|
1.06 |
Viscosity cPs¹ |
|
|
-range |
|
3-12 |
-typical value |
|
5 |
|
|
|
Tensile Strength² |
(N/mm²)
|
18 |
Fixture Time |
(secs)
|
5-30 |
Full Cure |
(hours)
|
24 |
Flash Point |
(°C)
|
> 85 |
Shelf Life @ 5°C |
(months)
|
6 |
Max Gap Fill |
(mm)
|
0.05 |
Operating Temperature Range |
(°C)
|
-50 to +70 |
|
|
|
¹ISO 3104/3105 |
|
|
²ISO 6922 |
|
|
Typical Curing Performance
Typical Speed
Steel/steel |
<30seconds |
ABS/ABS |
<10 seconds |
Rubber/Rubber |
<10 seconds |
Technical Data & MSDS are available upon request.
Click here to request Data Sheets
|