NATURAL RUBBER CONTACT ADHESIVE
Bostik 3851 Adhesive is a translucent grey, natural rubber solution in petroleum solvents.
Bostik 3851 Adhesive is used for bonding natural rubber and latex sheeting to each other and to porous surfaces such as leather, canvas etc.
Ensure rubber surfaces are thoroughly clean and dry, abrading the surfaces if possible. Leather surfaces should also be abraded if necessary
Apply Bostik 3851 Adhesive by brush to both surfaces to be joined and allow the adhesive to become touch dry (approximately 10 - 20 minutes) before bonding the surfaces together under pressure
NOTE: On porous surfaces it may be necessary to apply more than one coat of adhesive. In this case adhesive application to the rubber should coincide with the last coating on the porous surface, allowing 30 minutes between coats.
COVERAGE: Approximately 4m² per litre on rubber; less on porous surfaces, dependant on the number of coats.
CLEANER: Use Cleaner 4 for surface preparation, adhesive thinning if necessary and removal of excess adhesive.
If you require more information please see Technical Data Sheet or MSDS
Click Here to request Data Sheet