Typical Applications
PC 20 is specially formulated for the bonding of plastics, rubbers, wood, metals and other common substrates. Recommended for use on assemblies with very close fitting parts and smooth, even surfaces. Can be used as a post-assembly adhesive to wick into parts.
Product Description
PC 20 is a very low viscosity (5 cPs) modified Ethyl Cyanoacrylate adhesive. PC 20 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required.
Properties of uncured material
Chemical type |
|
Ethyl |
Appearance |
|
Clear |
Specific Gravity |
|
1.06 |
Viscosity cPs¹ |
|
|
-range |
|
2-5 |
-typical value |
|
4 |
|
|
|
Tensile Strength² |
(N/mm²)
|
21 |
Fixture Time |
(secs)
|
1-20 |
Full Cure |
(hours)
|
24 |
Flash Point |
(°C)
|
> 85 |
Shelf Life @ 5°C |
(months)
|
12 |
Max Gap Fill |
(mm)
|
0.05 |
Operating Temperature Range |
(°C)
|
-50 to +80 |
|
|
|
¹ISO 3104/3105 |
|
|
²ISO 6922 |
|
|
Typical Curing Performance
Typical Speed
Steel/steel |
<15 seconds |
ABS/ABS |
<5 seconds |
Rubber/Rubber |
<5 seconds |
Wood (balsa) |
<3 seconds |
Technical Data & MSDS are available uponrequest.
Click here to request Data Sheets
|