Product Description
Lockfast P65 is designed for the sealing and locking of metal fittings and pipes. The product is a single component anaerobic , low strength , acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage, loosening from vibration and shock.
Lockfast P65 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
White liquid |
Chemical Form |
Dimethacrylate ester |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
High |
Strength |
Low |
Application |
Thread sealing |
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.1 |
Viscosity @ 25°C |
175,000 - 525,000 mPas |
Flash Point |
See MSDS |
Operating Temp °C |
-54°C - 150°C |
Seal to operating pressure |
4 hours |
Pressure Resistance is PSI |
10000 |
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive. This product is not recommended for use on certain plastics.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|