Product Description
Lockfast G74 is designed to seal close fitting joints between flanges and faces. The product is a single component anaerobic, medium strength thixotropic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces. Provides resistance to low pressures immediately after assembly of flanges.
Lockfast G74 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
Orange paste |
Chemical Form |
Dimethacrylate ester |
Fluorescence |
Positive under UV light |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
Thixotropic |
Strength |
Medium |
Application |
Sealing |
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.1 |
Viscosity @ 25°C |
70,000 - 120,000 |
Flash Point |
See MSDS |
General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive. This product is not recommended for use on certain plastics.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|