Product Description
Lockfast R38 is designed for the bonding of cylindrical fitting parts, particularly where bond gap can approach 0.25mm. The product is a single component anaerobic, acrylic based product. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
Lockfast R38 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
Green liquid |
Chemical Form |
Urethane methacrylate |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
High |
Strength |
High |
Application |
Retaining |
Applications include sleeves into housings/shafts and locking bushings.
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.09 |
Viscosity @ 25°C |
2000-3000 mPas |
Flash Point |
See MSDS |
Fixture Time |
10-15 mins |
General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|