Product Description
Lockfast T72 is designed for the permanent sealing and locking of threaded fasteners. The product is a single component anaerobic, high strength, acrylic based threadlocker. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.
Lockfast T72 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
Red |
Chemical Form |
Dimethacrylate ester |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
Medium |
Strength |
High |
Application |
Treadlocking |
Lockfast T72 is particularly suitable for uses including sealing and locking of large studs and bolts (M25>).
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.11 |
Viscosity @ 25°C |
4000-6000 cPs |
Flash Point |
See MSDS |
Fixture Time |
15-30 mins |
General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive. This product is not recommended for use on certain plastics.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|