Product Description
Lockfast T22 is designed for the sealing and locking of threaded fasteners which may require easy disassembly with standard handtools. The product is a single component anaerobic, low strength thixotropic, acrylic based threadlocker. The product cures when confined in the absence of air between close fitting metal surfaces and prevents leakage and loosening from vibration and shock.p>
Lockfast T22 offers the following characteristics:
Technology |
Acrylic |
Appearance (uncured) |
Purple liquid |
Chemical Form |
Dimethacrylate ester |
Fluorescence |
Positive under UV |
Cure |
Anaerobic |
Secondary Cure |
Activator |
Components |
Single - requires no mixing |
Viscosity |
Thixotropic, low |
Strength |
Low |
Application |
Threadlocking |
Lockfast T22 is particularly suitable for uses such as adjustment of set screws, small diameter or long length fasteners where easy disassembly is required without shearing the screw.
Properties of Uncured Material
|
Typical Value |
Specific Gravity @ 25°C |
1.05 |
Viscosity @ 25°C |
1200-1500 cPs |
Flash Point |
See MSDS |
Fixture Time |
15 mins |
General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be use with chlorine or other strong oxidising materials. For information on the safe handling of this product, consult the Material Safety Data Sheet, (MSDS).
Where washing systems are used to clean the surfaces before bonding, it is important to check the compatibility of the washing solution with the adhesive. In some cases these solutions can affect the cure and performance of the adhesive. This product is not recommended for use on certain plastics.
Technical Data Sheets & MSDS are available upon request.
Click here to request Data Sheets
|