| |
Product Name- |
|
 |
PROCURE PC95 |
PC 95 is a low-medium viscosity (40 cPs) modified Ethyl Cyanoacrylate adhesive.
PC 95 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. |
 |
PROCURE PC85 |
Specifically formulated for applications requiring high; viscosity, impact and peel resistance. PC85 develops strong bonds on most metals, plastics or rubbers. PC85 is a one-component solvent-free system and does not require the use of a catalyst, heat or clamps. When a thin layer of PC85 is applied between two surfaces comes into contact with atmospheric moisture, a rapid polymerization occurs producing the ultimate bond. |
| |
PROCURE PC80 |
Procure PC80 is a black ethyl cyanoacrylate, with higher peel and shock resistance than other grades. PC80 has a longer setting time than regular Cyanoacrylate adhesive which allows enough time for users to put materials together after application. It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, etc. |
 |
PROCURE PC790 |
PC790 is used to give instant, ''on demand'' curing of Procure cyanoacrylates. It is especially suitable for use with slower curing, high viscosity grades and with porous substrates where the adhesive must cure before being absorbed into the substrate.
PC790 may also be used to ''fillet-cure'' cyanoacrylates and to cure adhesives outside the joint. |
| |
PROCURE PC780 |
PC780 is a solvent-based activator formulated to increase the cure speed of Procure Cyanoacrylate adhesives. It is designed for the bonding of uPVC plastics where “yellowing” can be a consideration |
| |
PROCURE PC750 |
PC750 is a solvent-based activator formulated to increase the cure speed of Procure Cyanoacrylate adhesives. |
| |
PROCURE PC60 |
PC 60 is a medium viscosity, low-odour alkoxy-ethyl cyanoacrylate adhesive. PC 60 is a low bloom product specially formulated for cosmetically critical applications to eliminate whitening/chlorosis of bonded joints. The low-odour characteristic improves user comfort. |
| |
PROCURE PC54 |
PC 54 GEL Instant Superglue is a faster curing, very high viscosity Ethyl Cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals. The new gel formulation exhibits improved thixotropic behaviour and uniform appearance. |
| |
PROCURE PC50 |
PC 50 is a medium viscosity modified Ethyl Cyanoacrylate adhesive. PC 50 is suitable for bonding a very wide range of materials, including some porous ones, where a fast cure speed is required. |
 |
PROCURE PC24 |
PC 24 is a medium viscosity modified Ethyl Cyanoacrylate adhesive. PC 24 is suitable for bonding a very wide range of materials, including some porous ones, where a fast cure speed is required. |
| |
PROCURE PC22 |
PC 22 Instant Superglue is a high viscosity Ethyl Cyanoacrylate based adhesive.
PC 22 is suitable for bonding a wide range of materials. |
| |
PROCURE PC20 |
Procure PC 20 is a very low viscosity (5 cPs) modified Ethyl Cyanoacrylate adhesive. PC 20 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. |
| |
PROCURE PC16 |
PC 16 is a high viscosity modified Ethyl Cyanoacrylate adhesive. PC 16 is suitable for bonding a very wide range of materials, including many porous ones, where a fast cure speed is required. |
| |
PROCURE PC1473 |
PC 1473 is a high viscosity, black rubber-toughened cyanoacrylate adhesive. PC 1473 displays excellent peel and impact strength and is well suited to applications involving vibration, thermal shock, temperature cycling and high humidity |
 |
PROCURE PC09 |
PC09 GEL Instant Superglue is a faster curing, very high viscosity Ethyl Cyanoacrylate based adhesive. The new formulation shows greater surface insensitivity thus allowing faster bonding of all substrates and improved performance on wood, card and metals. The new gel formulation exhibits improved thixotropic behaviour and uniform appearance. |
| |
PROCURE PC08 |
PC 08 is a very low viscosity, low-odour alkoxy-ethyl cyanoacrylate adhesive. PC 08 is a low bloom product specially formulated for cosmetically critical applications to eliminate whitening/chlorosis of bonded joints. The low-odour characteristic improves user comfort. |
| |
PROCURE PC06 |
PC 06 is a low-medium viscosity (40cPs) modified Ethyl Cyanoacrylate adhesive.
PC 06 is suitable for bonding a very wide range of materials, including some porous ones, where very fast cure speed is required. |
| |
PROCURE PC03 |
PC 03 is a high viscosity, low-odour alkoxy-ethyl cyanoacrylate adhesive. PC 03 is a low bloom product specially formulated for cosmetically critical applications to eliminate whitening/chlorosis of bonded joints. The low-odour characteristic improves user comfort. |
| |
PROCURE PC01 |
PC01 is a medium viscosity modified Ethyl Cyanoacrylate adhesive. PC01 is suitable for bonding a very wide range of materials, including some porous ones, where a fast cure speed is required. |
... Our Products
Applicators
